Multitech ProxyServer MTPSR1-202ST User Manual page 34

ProxyServer User Guide
From the Advanced tab, you can change the parameter configurations for the type of Message
Printing, determine when to enable Script Printing, and define the Switch Type providing the ISDN
connection.
In the Configuration Types window, select the appropriate configuration (e.g., USA_DMS100) and
click Edit. The Parameter Configuration dialog box is displayed.
This dialog box displays the network switch type and the US Parameters or the Europe Parameters,
depending on the switch type selected. In the first example (above), the default US Parameters are
displayed and are available for editing purposes. The uppermost text box (USA_DMS10) on the
dialog box is not available for editing as it is used only for adding the names of new parameter
configurations. The Net Switch Type is also unavailable as it is the switch type that was defined for
this particular configuration.
General Parameters
Data TEI (Terminal Endpoint Identifier) - You may have received a fixed TEI (a number from 0 to 63)
from your provider; if so, then select that number from the list in the Data TEI box. However, if the
central office switch assigns a dynamic TEI each time your ProxyServer connects to the network,
then leave it set to the default, "Auto TEI." If you have multiple ProxyServers attached to a network
terminator bus, you may want to set the Data TEI to "Disabled."
Voice TEI - You may have received a fixed TEI (a number from 0 to 63) from your provider; if so, then
select that number from the list in the Voice TEI box. However, if the central office switch assigns a
TEI each time your ProxyServer connects to the network, then leave it set to "Auto TEI." Again, if
you have multiple ProxyServers attached to a network terminator bus, you may want to set the Voice
TEI to "Disabled."
34
MTPSR1-202ST