Table of Contents
Advertisement
ProxyServer User Guide
Command:
!L
Function:
Display Network Configuration
Values: n/a
Default: n/a
Description:
Use the !L command to display the ProxyServer's current DN, SPID, TEI, Data
protocol, and switch type.
!L
Command:
>Dn
Function:
Embedded Protocol Analyzer
Values:
0, 1, 2, 3, 4, 98 or 99
Default:
n/a
Description:
The Embedded Protocol Analyzer records and analyzes various protocols on the B-
channel, D-channel and DTE-DCE interface. The Embedded Protocol Analyzer is
useful as a diagnostic tool, in that essential data messages are displayed. This
offers the ability to observe interactive operations of the ProxyServer, Central
Exchange, and remote communications equipment.
>D0
>D1
>D2
>D3
>D4
>D98
>D99
Command:
!N1=n
Function:
Data Directory Number (DN)
Values:
n = 24-character string
Default:
null string
Description:
The !N1 command sets the directory number (DN) for the data channel. The
directory number is a telephone number that is assigned to the ProxyServer at
subscription time by the ISDN service provider. The DN is a string of up to 24
characters; valid characters are 0–9, the * character, and the # character.
!N1=n
Command:
*!N1=n
Function:
Voice Directory Number (DN)
Values:
n = 24-character string
Default:
null string
Description:
This command sets the directory number (DN) for the voice channel. See the !N1=
command description.
*!N1=n
Command:
!RXGn
Function:
Receive Gain
Values:
n = 0–10
Default:
!RXG6 (Medium volume)
Description:
Use the !RXG command to control the speaker level of an analog telephone device
connected to the AUX port. AT!RXG0 selects the lowest level, AT!RXG10 selects
the highest level, and intermediate numbers select intermediate levels.
!RXG0
!RXG10
Command:
!TXGn
Function:
Transmit Gain
Values:
n = 0–4
Default:
!TXG0 (No amplification)
106
Displays the current network configuration
Display B-channel traffic, decoded as V.120
Display D-channel traffic, decoding layers 2 and 3 (Q.921 and Q.931)
Display D-channel traffic, decoding layer 2 only (Q.921)
Display D-channel traffic, decoding layer 3 only (Q.931)
Display B-channel traffic, decoded as X.75
Disable Embedded Protocol Analyzer, buffered data unchanged
Enable Embedded Protocol Analyzer, clearing buffered data
Sets the DN for the data channel
Sets the DN for the voice channel
Lowest speaker volume through
Highest speaker volume
MTPSR1-202ST
Advertisement
Table of Contents
