Multitech ProxyServer MTPSR1-202ST User Manual page 54

ProxyServer User Guide
8. If DHCP Services are NOT active on the ProxyServer, you will have to manually enter your IP
address. Select manual addressing by clicking the Specify an IP address option. The IP
Address and Subnet Mask fields become active.
9. In the IP Address field, type the IP address assigned to your PC.
Remove the default IP address (if any) and begin typing the new address. This address is
entered in dotted decimal notation and is comprised of four groups (octets) separated by periods
or "dots." If a group has fewer than 3 digits, type the necessary digits and press the space bar to
move to the next group. When you are finished, verify that the IP address is identical to the IP
address you were given for your PC.
54 MTPSR1-202ST