Table of Contents
Advertisement
ProxyServer User Guide
Loading your Software
The ProxyServer Install Software and User Guide are provided on the ProxyServer CD-ROM. The
CD-ROM is auto-detectable and should start automatically when inserted into your CD-ROM drive.
After you have configured your ProxyServer, you can install the User Guide on your hard drive (for
later viewing or printing) by clicking the Install Manuals icon on the Installation CD screen.
1. Before inserting the ProxyServer CD-ROM into your CD-ROM drive, determine whether you will
configure your ProxyServer over the LAN or directly from a local PC. For configuring over a
network, your PC must first be configured for network communications (i.e., TCP/IP stack must
be installed) and both the PC and the ProxyServer must be on the same physical LAN segment.
If you need to load the TCP/IP stack, refer to Chapter 5 in this User Guide.
2. Insert the ProxyServer CD-ROM into a CD-ROM drive on your local PC. The CD-ROM should
start automatically. However, it may take 10 to 20 seconds for the Multi-Tech Installation CD
screen to appear.
The Installation CD screen is displayed.
If the Multi-Tech Installation CD Screen does not appear automatically, click My Computer, then
right-click the CD-ROM drive icon and click Autorun.
3. When the Multi-Tech Installation CD Screen appears, click the Install Software icon.
4. The ProxyServer Setup Welcome screen is displayed.
Press Enter or click Next> to continue.
18
MTPSR1-202ST
Advertisement
Table of Contents
