DSU ProxyServer User Guide
Diagnostics
The ProxyServer is equipped with a built-in diagnostics utility that can be accessed through the
COM port of your PC (remote users cannot access diagnostics). Click Built-in Test in the Proxy
Setup menu and the Diagnostics dialog is displayed.
Select the port you wish to run diagnostics on from the Test Port group (Ethernet, WAN 1 or
WAN 2), then click Test to start the test.
For more details and parameters about specific fields within the diagnostics dialog, refer to the
on-line help.
Scripting
To enable scripting, click WAN from the Proxy Setup menu, and click on the WAN 2 tab
(scripting cannot be enabled on the WAN 1 (DSU) port).
Click on the Script Enable check box to enable scripting. Click Script to access scripting
options. The Script Dialog menu is displayed. From this menu, you can edit, compile and
download scripts.
For more information on scripting, refer to
36
Appendix B -
Scripting.