Updating the Firmware .................................................................................................................................. 1052

Preparing to Transfer the Printer

To protect the internal parts in transit, always follow these steps before transferring the printer to a new location.

Refer to the Setup Guide for details on packing the printer and installing it after transfer.

Important

• Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may leak and dam-

age the printer if you do not prepare the printer correctly and it is tipped or stood on end in transit.

• It is not possible to prepare the printer for transfer if the Display Screen requests you to replace the Mainte-

nance Cartridge or check the remaining capacity. Replace the Maintenance Cartridge before transfer prepara-

tions. (See "Replacing the Maintenance Cartridge.")

Note

• Depending on the state of the printer, part replacement may be necessary when preparing to transfer the

printer (that is, when you execute the printer menu item to prepare for transfer).

• Ink must be drained before Level 2 or Level 3 printer transfer, as described in the following table. Prepare a

Maintenance Cartridge in advance.

• Always follow the instructions of the service representative when transferring the printer under Level 3 con-

ditions.

1044

Preparing to Transfer the Printer

Other Maintenance

Shipping Meth-

Level

od (Example)

By truck

Lengthwise: 0–30º

Rotation: 0–10º

By plane

All directions: 0–30º

→P.1028

Permitted Angle of Inclination

Required

Amount of Ink

Mainte-

to Dispose of

nance Car-

tridges(*1)

0 or 1

Approx. 1.2 L

1 or 2

(40.6 fl oz)

iPF8300S

Table of Contents

Show Quick Links

Hide quick links:

Chapters

Table of Contents

Other Maintenance; Preparing To Transfer The Printer - Canon iPF8300S User Manual