The Size Of Clear Film Cannot Be Detected; Margins Are Wide - Canon iPF8300S User Manual

The Media Take-up Sensor cord is not connected to the Right Media Take-up Unit
correctly.

The size of clear film cannot be detected

Cause
The Platen is soiled with ink or other substances.

Margins are wide

Rolls are advanced a specific amount before cutting to prevent problems with cutting and
paper ejection.
iPF8300S
Cause
Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.")
Cause
Troubleshooting > Problems Regarding Paper
Corrective Action
Reconnect the Media Take-up
Sensor cord as follows.
1. Turn the printer off.
2. Disconnect the Media Take-
up Sensor cord from the
Right Media Take-up Unit
and reconnect it firmly, all
the way in.
3. Turn the printer on.
(See "Using the Media Take-
up Unit (Optional).")
If the Media Take-up Unit con-
tinues rotating, contact your
Canon dealer for assistance.
Corrective Action
→P.1040
Corrective Action
This operation is normal.
The size of clear film cannot be detected
>
→P.831
12
1067