Loading And Printing On Rolls - Canon iPF8300S User Manual

If the Data Lamp is flashing, the printer is receiving a print job. Turn off the printer only after printing is finished.
2.
Hold down the Power button for more than a second.
After "Shut Down.. Please Wait.." is shown on the Display Screen, the printer shuts off.

Loading and Printing on Rolls

These are the basic steps for loading and printing on rolls.
Follow these steps to load and print on rolls.
• For details on using the Output Stacker, see "Using the Output Stacker."
• For details on using the optional Media Take-up Unit, see "Media Take-up Unit."
Important
• If you are not using the optional Media Take-up Unit when printing long documents such as banners,
spread a clean cloth or paper on the floor. Use the Output Stacker to prevent long printed documents
from being soiled by the floor after they are printed. (See "Using the Output Stacker.")
Note
• For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See
"Paper Sizes.")
• To wait until the ink dries after printing before cutting the roll, set Drying Time in the printer driver.
(See "Specifying the Ink Drying Time for Rolls.")
• Once you have used all the paper on a roll, clean the platen. If the Platen inside the Top Cover becomes
dirty, it may soil the underside of paper. (See "Cleaning Inside the Top Cover.")
iPF8300S
(See "Types of Paper.")
→P.775
Basic Printing Workflow
→P.823
→P.911
→P.774
→P.800
Loading and Printing on Rolls
> Printing procedure >
→P.823
→P.1040
1
5