Frequently Asked Questions - Canon iPF8300S User Manual

Frequently Asked Questions

Frequently Asked Questions ......................................................................................................................... 1055
Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the hyperlinks in
the answer column.
Question
I want to easily create
vertical or horizontal
banners.
A replacement mes-
sage for the Mainte-
nance Cartridge was
displayed.
I want to perform en-
largement copying
from a Color image-
RUNNER.
I want to tilt and
transfer the printer.
I want to know the
time to replace the Ink
Tank.
Does this printer sup-
port sub-ink tank sys-
tem?
I want to know how to
configure roll cutting.
I want to configure so
that the roll is cut au-
tomatically after wait-
ing for the ink to dry.
I want to replace the
Printhead myself.
How do I print with-
out borders?
iPF8300S
You can print originals that are in landscape (or portrait) orientation automatically enlarged to
fit the roll width. This is an easy way to create vertical or horizontal banners.
⇒" Printing Vertical or Horizontal Banners (Large-Format Printing)
If a replacement message for the Maintenance Cartridge is displayed, replace it with a new
Maintenance Cartridge.
⇒" When to Replace the Maintenance Cartridge
By using Color imageRUNNER Enlargement Copy (iR enlargement copy), you can print en-
largements of scanned originals from a Color imageRUNNER.
⇒" Printing Enlargements of Scanned Originals from a Color imageRUNNER
⇒" Printing Enlargements of Scanned Originals from a Color imageRUNNER
The tasks required before transfer differ depending on the angle of tilting. To protect internal
mechanisms, prepare the form of transfer before transferring.
⇒" Preparing to Transfer the Printer
Normally, replace it when an Ink Tank replacement message is displayed.
Ink Tank replacement is possible even during printing, when print jobs are being canceled, or
when paper is being advanced.
⇒" When to Replace Ink Tanks
This printer supports sub-ink tank system.
Even if an ink tank becomes empty during printing, since a certain amount of ink always is
stored in a sub-ink tank, you can replace the ink tank while printing.
⇒" Replacing Ink Tanks
→P.997
You can select the cutting method by the setting of the printer driver and the setting of the
printer.
To cut rolls automatically after printing, set Cutting Mode of the printer to Automatic and
Automatic Cutting of the printer driver to Yes.
When using paper for which ink adhesion takes time or the print surface is easily scratched,
we recommend that you set the Cutting Mode setting of the printer to Eject.
⇒" Specifying the Cutting Method for Rolls
⇒" Cutting Roll Paper After Printing
In the printer driver, you can set the time for waiting until the ink dries.
Also, you can set likewise on the printer.
⇒" Specifying the Ink Drying Time for Rolls
⇒" Menu Structure
→P.928
Acquire a Printhead supported by the printer. You can replace it yourself.
⇒" Replacing the Printhead
When printing on rolls, you can perform borderless printing by configuring the printer driver.
(when printing on cut sheets, you cannot perform borderless printing)
⇒" Borderless Printing on Paper of Equivalent Size
⇒" Borderless Printing by Resizing Originals to Fit the Roll Width
Troubleshooting
Answer
→P.1037
"
→P.1044
"
→P.1009
"
"
→P.802
"
→P.196
"
→P.800
"
"
→P.1013
→P.107
> Frequently Asked Questions
"
→P.122
"
"
→P.304
"
→P.606
"
"
→P.114
Frequently Asked Questions
>
12
1055