Set./Adj. Menu - Canon iPF8300S User Manual

Control Panel > Printer Menu

Set./Adj. Menu

Test Nozzle Check
Print
Status Print
Interface Print
Paper Details
Print Job Log
Menu Map
Adjust Head
Printer Posi.
Adj.
9
Feed
Priori-
ty
942
Menu Settings
>
Setting Item
Auto(Standard)
Auto(Advanced)
Auto(Expansion)
Manual
Adj. Automatic
Priori-
Print Quality
ty
Print Length
Adj. Auto(GenuinePpr)
Quali-
ty
Auto(OtherPaper)
Description, Instructions
Print a test pattern to check the nozzles.
Print information about the setting values and condi-
tion of the printer.
Print interface settings information.
Print the paper settings as specified in Paper Details.
Print a record of print jobs, including the paper type
and size, amount of ink consumed, and so on. Ink con-
sumption indicates a rough estimate of the amount of
ink consumed per print job.( *1
Print the menu structure.
The printer prints and reads a test pattern for automat-
ic adjustment of Printhead alignment relative to the
printing direction. (See "Automatic Adjustment to
Straighten Lines and Colors (Head Posi. Adj.).")
→P.850
The printer prints and reads a test pattern for automat-
ic adjustment of Printhead alignment relative to the
printing direction and spacing between nozzles and
colors. (See "Automatic Adjustment to Straighten
Lines and Colors (Head Posi. Adj.).")
The printer prints and reads a test pattern for automat-
ic adjustment of Printhead alignment relative to the
printing direction and spacing between nozzles and
colors. Adjustment is performed at a higher level of
precision than Auto(Advanced). (See "Automatic
Adjustment to Straighten Lines and Colors (Head
Posi. Adj.).")
→P.850
Print a test pattern for adjustment of Printhead align-
ment relative to the printing direction. Enter the ad-
justment value manually based on the resulting pat-
tern. (See "Manual Adjustment to Straighten Lines
and Colors (Head Posi. Adj.).")
Specify exact paper feeding, if desired. Normally, se-
lect Automatic. Choose Print Quality for attractive
printing. Choosing Print Quality also makes banding
less noticeable. Choose Print Length if you prefer to
feed the paper an exact amount. However, note that
slight banding may occur in the direction of carriage
scanning when Print Length is selected.
Specify this mode with paper identified in the Paper
Reference Guide.(See Paper Reference Guide .)
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount. (See "Automatic
Banding Adjustment (Adj. Quality).")
Specify this mode with paper not in the Paper Refer-
ence Guide.(See Paper Reference Guide .)
)
→P.949
→P.850
→P.852
→P.857
iPF8300S