Replacing Ink Tanks - Canon iPF8300S User Manual

Note
• For instructions on Ink Tank replacement, see "Replacing Ink Tanks."

Replacing Ink Tanks

Compatible ink tanks
Replacement ink tanks in 330 ml (11.2 fl oz) and 700 ml (23.7 fl oz) capacities are supported.
For information on supported ink tanks, see "Ink Tanks."
Precautions when handling ink tanks
Take the following precautions when handling ink tanks.
Caution
• For safety, keep ink tanks out of the reach of children.
• If ink is accidentally ingested, contact a physician immediately.
Important
• There may be ink around the ink supply section of ink tanks you removed. Handle ink tanks carefully during
replacement. The ink may stain clothing.
• Do not install used ink tanks in another model of printer.
This will prevent correct ink level detection, which may damage the printer or cause other problems.
• We recommend using up an Ink Tank in the course of printing within six months after breaking the seal.
Printing quality may be affected if you use older ink tanks.
• Do not leave the printer without ink tanks installed for extended periods (a month or more). Residual ink may
become clogged inside the printer and affect printing quality.
How to replace an Ink Tank
1.
Confirm the message.
2.
Access the menu for Ink Tank replacement.
3.
Remove the Ink Tank.
• 330 ml ink tanks
• 700 ml ink tanks
4.
Load the new Ink Tank.
• 330 ml ink tanks
• 700 ml ink tanks
Confirm the message
When the ink level becomes low, a message is displayed on the Display Screen.
iPF8300S
→P.997
→P.998
→P.999
→P.1000
→P.1002
→P.1005
Maintenance and Consumables
→P.997
→P.996
(Otherwise, open the Ink Tank Cover.)
> Ink Tanks >
11
997
Replacing Ink Tanks