Leveling And Lagging Down The Appliance; Accessories - Heat & Glo PALOMA-BL Owner's Manual

C. Leveling and Lagging Down the Appliance
Lagging the appliance down is REQUIRED.
WARNING
Fire Risk.
Odor Risk.
Tipping Risk
• Install gas stove on a stable, level platform/
fl oor strong enough to support gas stove
without tipping.
• USE wood fl ooring, ceramic tile, brick hearth
or high pressure laminate fl ooring applied
directly over the sub-fl ooring material.
Securing holes
Level
screw
Lag bolt hole
Figure 8.4
Figure 8.5
After unbolting the appliance from the pallet, insert two
1/4 20 x 1/1/2 counterscrews.
Using pliers, adjust the counterscrews to level the appli-
ance.
34
Figure 8.6
Place the lag bolt from the component bag in the center
hole in the bottom plate (lagging clearance hole). The
appliance must be lagged down securely to prevent tip-
ping forward.
Level
screw
Figure 8.7
Using pliers, adjust the counterscrews to level the appli-
ance.
D. Accessories
Install approved accessories per instructions included
with accessories. See Service Parts List for appropriate
accessories. Refer to Section 16.
Heat & Glo • Paloma • 7031-220 Rev. P • 10/08
WARNING
Shock or fi re risk.
Use ONLY optional accessories approved for
this appliance.
• Using non-listed accessories voids warranty.
• Using non-listed accessories may result in a
safety hazard.
• Only Hearth & Home Technologies approved
accessories may be used safely.
LAGGING
CLEARANCE
HOLE