Advertisement
Available languages
Available languages
PROGRAMMING DEVICE
CONTROL
The RadioShack 6-in-1 Easy Setup Voice Remote is
preset at the factory to operate an RCA TV, VCR,
DVD Player, or Satellite Receiver, Pioneer CD Player
and Audio Receiver.
To begin programming device control:
1.
Press and hold SETUP until you hear the
programming menu.
2.
Press 1. The Programming Device Control
options play:
•
"Press one to enter a device code. "
See "Enter a Device Code" on page 6.
•
"Press two to search for a device code. "
See "Searching For Your Code" on page 7.
•
"Press three to retrieve a device code you
found during search. "
See "Checking The Codes" on page 7.
E
D
C
NTER A
EVICE
ODE
To control devices other than the default brands,
perform the following steps; otherwise skip this
section:
1.
Turn on a desired device (e.g.,VCR or DVD
player) and, if applicable, insert media (e.g.,
cassette or disc).
NOTE: Please read steps 2 through 9 completely
before proceeding. Before starting step 2, review
the "Manufacturer's Codes" (starting on page
30). Brands are listed alphabetically in order of
most popular ones first. Highlight or write down
the devices and the codes you wish to program.
2.
Press and hold SETUP until you hear the
programming menu, then press 1.
NOTE: If more than 15 seconds pass between key
presses, the remote says "Goodbye" and exits
programming.
Press 1 again.
3.
NOTE: To stop programming at any time, press and
hold BACK.
NOTE: If more than 15 seconds pass between key
presses, the remote says "Goodbye" and exits
programming.
4.
At the prompt, press a device key once (i.e.,
CBL/SAT, AUX, TV, DVD, AUDIO, or VCR).
NOTE: Please refer to the "Device Table" on page 5
when choosing a device key for programming.
5.
Use the Manufacturer's Codes (starting on page
30) to locate the type of device and brand
name. At the prompt, use the Number Keys to
6
Programming Device Control
R
S
6-
-1 E
ADIO
HACK
IN
S
V
R
ASY
ETUP
OICE
enter the first four-digit code for your device.
If performed correctly, the LED blinks twice,
the remote says "Success".
NOTE: If the LED displayed one long flash instead,
and the remote played "Try again", a mistake has
occurred and the remote returns to the prompt for
step 4. Try entering the same code again.
6.
The remote prompts "Press a test key, such as
power or play. If your device performs the test
function, press Setup to save, or enter the next
code from the manual. " Press a test key.
NOTE: Do not use number keys as test functions. The
remote will think you are entering a different code.
7.
If the device performs the test function, press
SETUP to save the code. The remote says
"Success", and returns to the prompt for
step 3.
NOTE: If the device does not respond, repeat steps 5
through 7 with the next code for your device.
Hold BACK until the remote states "Goodbye. "
8.
Aim the remote control at the device and press
POWER once.The device should turn off.
If it does not, repeat steps 2 through 6, trying
each code for your brand until you find one
that works. If it still doesn't work, try
"Searching For Your Code" on page 7.
9.
If the code works, repeat steps 2 through 6 to
program another device or press and hold
SETUP to exit programming.
10. For future reference, write down each working
device code in the following boxes:
CBL/SAT Code:
Brand Name:_______________________
AUX Code:
Brand Name:_______________________
DVD Code:
Brand Name:_______________________
TV Code:
Brand Name:_______________________
AUDIO Code:
Brand Name:_______________________
EMOTE
Hide quick links:
Advertisement
Chapters
