Check Current Brand Code; Operation - Radio Shack 15-310 User Manual

6. Verify the setup by testing various keys and functions.
If some of your device's functions do not respond to
the remote, repeat steps 2-6.
n
Notes:
• During a search, you can press SET to change search
direction from forward to backward or vice versa.
• If no keys are pressed in 10 seconds, search stops.

Operation

Check Current Brand Code

For future reference and to save time if you ever need
to set up your remote again, retrieve and write down
your device codes for each device key on your universal
remote.
Complete the following steps to check the code number
for a specific device. The red LED on your universal
remote will flash to indicate the codes.
1. Press the device key on your universal remote.
2. To check the first digit, press and hold SET, then
press numerical key 1. The red LED will flash
repeatedly to indicate the first digit. (once for 1,
twice for 2, etc. If the red LED does not flash, this
indicates that the first digit is "0.")
3. To check the second digit, press and hold SET, then
press 2. The red LED will flash repeatedly to indicate
the second digit.
9