Auto Code Search - Radio Shack 15-310 User Manual

Auto Code Search

Auto Code Search automatically sends device codes to
the device that you want to control.
1. Power on the device that you want to control. For
VCRs and DVD players, you must insert a tape or disc.
2. On your universal remote, press and hold SET, then
press and hold a device key (TV, VCR/DVD or STB/
CBL). Continue to hold down both keys for more than
three seconds. The red LED flashes and the universal
remote starts searching. Release both buttons.
3. When the device responds in any way (switches
off, play, pause, volume change, channel changes),
press any key other than SET within two seconds to
confirm the code. The red LED will stop flashing.
4. Verify the setup by testing various keys and
functions. Press G on your universal remote to turn
on the device if it turned off in step 3. If some of your
device's functions do not respond to the remote,
repeat steps 2-4.
n
Notes:
• Because Auto Code Search requires you to stop the
search, you must remain with the device during the
process.
• To stop searching, press any key (except SET). The
red LED light turns off and the search stops.
• During a search, you can press SET to change search
direction from forward to backward or vice versa.
7