Ford Explorer 2010 Owner's Manual page 477

Hide thumbs Also See for Explorer 2010:
Table of Contents

Advertisement

Instrument Cluster
AVERAGE FUEL XX.X MPG / (L/100km)
Average fuel economy displays your average fuel economy in miles/gallon
or liters/100 km.
If you calculate your average fuel economy by dividing miles traveled by
gallons of fuel used (liters of fuel used by 100 kilometers traveled), your
figure may be different than displayed for the following reasons:
• Your vehicle was not perfectly level during fill-up
• Differences in the automatic shut-off points on the fuel pumps at
service stations
• Variations in top-off procedure from one fill-up to another
• Rounding of the displayed values to the nearest 0.1 gallon (liter)
1. Drive the vehicle at least 5 miles (8 km) with the speed control
system engaged to display a stabilized average.
2. Record the highway fuel economy for future reference.
It is important to press the SELECT/RESET stem (press and hold for
two seconds in order to reset the function) after setting the speed
control to get accurate highway fuel economy readings.
SETUP MENU HOLD RESET
When this appears, press and hold the SELECT/RESET stem to reach
the setup menu.
Briefly press the SELECT/RESET stem to scroll through the setup menu
items. If the SELECT/RESET stem is not pressed within four seconds,
the message center returns to the info menu.
• System Check
• AWD Lock (4.6L engine vehicles only)
• Units (English/Metric)
• Language
• Autolamp
• Autolock
• Autounlock
• Park Aid (if equipped)
• Trailer sway control
• Oil Life Reset and Start Value
• Compass display
22
2010 Explorer (exp)
Owners Guide (own2002), 1st Printing
USA (fus)

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents