Intermec EasyCoder F4 Installation & Operation Manual page 84

Maintenance
Printhead
Cleaning
1
Open the side door.
Intermec EasyCoder F4 – Installation & Operation Ed. 3
Cleaning the printhead on a regular basis is important for the life
of the printhead and for the printout quality. You should clean
the printhead each time you replace thew ribbon and media. This
section describes how to clean the printhead using cleaning cards.
If additional cleaning is required, for example removing adhesive
residue from the platen roller or tear bar, use a cotton swab moistened
with isopropyl alcohol.
Isopropyl alcohol [(CH
fl ammable, moderately toxic, and mildly irritating substance.
2
Turn the printhead lift lever clockwise to raise
Warning!
) CHOH; CAS 67-63-0] is a highly
3 2
the printhead.
Chapter 12
83