Using Intermec Fingerprint - Intermec EasyCoder F4 Installation & Operation Manual

Chapter 2 Printing a Label
Using Intermec
Fingerprint
Y
12
The label we will design in Intermec Fingerprint will contain a box,
an image, a bar code, and a line of text. Note that the illustrations
are not reproductions of the label, but are merely intended to show
the principles of label editing.
Printing a Box
Let us start by printing a box 430 dots high and 340 dots wide
with a 15 dot line thickness. The box is inserted at position X=10;
Y=10:
NEW
10 PRPOS 10, 10
20 PRBOX 430,340,15
200 PRINTFEED
300 END
RUN
Note: The printer does not execute the program until you have
X
typed RUN .
Printing an Image
Now we add the image "GLOBE.1" after changing the print
coordinates to X=30; Y=30.
Note that the characters enclosing the word GLOBE.1 are quotation
marks (ASCII 034 decimal/22 hex) and indicate a string expression
(text) as opposed to a numeric expression (value). The same applies
to bartypes, bar code input data, barfonts, text fonts, and input to
text fi elds later in this chapter.
30 PRPOS 30,30
40 PRIMAGE "GLOBE.1"
RUN
Printing a Bar Code
You need to choose a bar code type before you can print a bar code.
Note there is no blank space in the bartype name. Then provide
the input data to the bar code.
50 PRPOS 75,270
60 BARTYPE "CODE39"
70 PRBAR "ABC"
RUN
Intermec EasyCoder F4 – Installation & Operation Ed. 3