Table of Contents
Advertisement
Removal and replacement procedures
Bluetooth module
✎
The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is
available using spare part number 537921-001. See
module cable removal information.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Switch cover (see
b. Keyboard cover (see
c. Power button board (see
Remove the Bluetooth module:
1. Release the Bluetooth module 1 as far as the Bluetooth module cable allows.
2. Disconnect the Bluetooth module cable 2 from the Bluetooth module.
3. Remove the Bluetooth module.
Reverse this procedure to install the Bluetooth module.
4–26
"Battery" on page
4-7).
"Switch cover" on page
"Keyboard cover" on page
"Power button board" on page
"Bluetooth module cable" on page 4-31
4-21)
4-23)
4-25)
for Bluetooth
Spare part number
577000-001
Maintenance and Service Guide
Advertisement
Table of Contents
