Table of Contents
Advertisement
Holsten1AE_Advanced_FM.book Page 23 Wednesday, November 8, 2000 11:24 AM
Printing Options
As printing options, the Reverse Or-
der Printing, Page Length Reduction
are available.
Reverse Order Printing
Normally, the machine prints the
pages of received messages in the or-
der that they were received uncollat-
ed.
However, with Reverse Order Print-
ing, the machine will collate the se-
quence by printing the message from
the last page first collated. This will
make it easier to distribute the re-
ceived fax messages, and make read-
ing them more convenient.
Preparation
Reverse Order Printing will not
take place unless you switch it on
beforehand.
To switch this feature on or off, see
the User Parameters. (see P.37 "Us-
er Parameters"switch10, bit0).
Page Length Reduction
If the machine receives a page that is
longer than the paper in the tray, the
machine reduces the length of the re-
ceived image so that it will fit on one
page.
The image length is within the follow-
ing limits.
Paper size in the tray Maximum reducible
length
A4
388.8mm
F4
411.7mm
Letter
365.2mm
Legal
411.7mm
If the received image is longer than
the above limits, there is no reduction
and the image is split up and printed
on two sheets of paper. Normally, the
last 10mm of the received image will
be repeated at the beginning of the
next page.
However, if you wish, the second
page can continue from where the
first page ended.
Note
❒ Contact your service representa-
tive if you require any adjustments
to this feature.
Printing Options
4
23
Advertisement
Table of Contents
