Replacing The Filter; Removing The Filter; Technical Specification; Disposal - DeLonghi ECAM23.450 Instructions For Use Manual

ty of 100 ml under the hot water spout.
13. Press the button to confirm the selec-
tion. The appliance begins delivering hot
water and the message " Please wait... " is
displayed.
14. After delivery, the appliance returns automa-
tically to the "Ready for coffee" position.
The new filter is active and indicated by an aste-
risk displayed under "Install filter" in the menu.
You can now use the coffee maker.

Replacing the filter

When "REPLACE FILTER!" is displayed, after two
months (see date indicator) or when the applian-
ce has not been used for 3 weeks, you should
replace the filter:
1. Remove the exhausted filter;
2. Remove the new filter from the packaging;
3. Turn the date indicator disk (see fig. 30) until
the next 2 months of use are displayed (the
filter lasts about two months);
4. Refill the tank;
5. Insert the filter in the water tank and immer-
se it completely, sloping it to enable the air
bubbles to escape (fig. 31);
6. Place the filter in the filter housing (fig. 32A)
and press as far as it will go. Close the tank
with the lid (fig. 32B), then replace the tank
in the machine;
7. Position a container with a minimum capaci-
ty of 100 ml under the hot water spout;
8. Press the P button to enter the menu;
9. Turn the selection knob until "Replace " is
displayed;
10. Press the button;
11. The message "Confirm?" is displayed;
12. Press the button to confirm the selec-
tion;
13. "Hot Water... Confirm?" is displayed.
14. Press the button to confirm the se-
lection. The appliance begins delivering hot
water and the message "Please Wait... " is
displayed.
15. After delivery, the appliance returns automati-
cally to the "Ready for coffee" position.
The new filter is now active and you can use the
coffee maker.

Removing the filter

If you want to continue using the appliance wi-
thout a filter, you must remove it and notify the
appliance of its removal as follows:
1. Extract the tank and exhausted filter;
2. Press the P button to enter the menu;
3. Turn the selection knob (fig. 8) until "Install
filter*" is displayed;
4. Press the
5. "Deactivate?" is displayed;
6. Press the
button to exit the menu.

TECHNICAl SPECIFICATION

Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power:
Pressure:
Water tank capacity:
Size LxHxD:
Cable length:
Weight:
Beans container capacity:
The appliance complies with the following
EC directives:
• Stand-by Directive no. 1275/2008;
• Low Voltage Directive 2006/95/EC and sub-
sequent amendments;
• EMC Directive 2004/108/EC and subsequent
amendments;
• Materials and accessories coming into con-
tact with food conform to EEC regulation
1935/2004.

DISPOSAl

Important information for correct dispo-
sal of the product in accordance with EC
Directive 2002/96/EC.
At the end of its working life, the product
must not be disposed of as urban waste.
It must be taken to a special local authority dif-
ferentiated waste collection centre or to a dealer
providing this service.
Disposing of a household appliance separately
avoids possible negative consequences for the
environment and health deriving from inappro-
priate disposal and enables the constituent mate-
rials to be recovered to obtain significant savings
in energy and resources.
As a reminder of the need to dispose of house-
hold appliances separately, the product is mar-
ked with a rubbish bin bearing a cross.
20
button;
button to confirm and the
1450W
15 bars
1,8 l max.
238x340x430 mm
1,15 m
9,1 kg
150 g