DeLonghi ECAM23.450 Instructions For Use Manual page 25

PROBlEM
The milk is not frothed,
or contains large
bubbles and squirts out
of the milk spout.
The appliance does not
come on.
POSSIBlE CAUSE
• The milk container lid or froth
adjustment knob is dirty
• The milk is not cold enough or is not
semi-skimmed.
• The froth adjustment knob is incorrectly
adjusted.
• The hot water/steam nozzle is dirty
• It is not plugged into the mains socket.
• The main switch (A8) is not turned on.
REMEDY
• Clean the milk container lid and knob as
described in the section "Cleaning the
milk container".
• Use skimmed or semi-skimmed milk at
refrigerator temperature (about 5° C).
If the result is not as you wished, try
changing brand of milk.
• Adjust following the instructions in the
section on preparing drinks with milk.
• Clean the nozzle as described in the
section "Cleaning the hot water/steam
nozzle".
• Plug into the mains socket.
• Place the main switch in the I position
(fig. 1).
24