Boot File Needs To Be Upgraded - Avaya one-X Installation And Maintenance Manual

Restart Scenarios
5. Press No to return to the Craft Local Procedure screen without restarting the telephone.
Press Yes to proceed with the registration steps covered in the
Process on page 19.
A restart does not affect user-specified data and settings like Contacts data or the telephone
login and password.
The remainder of the restart procedure depends on the status of the boot and application
files:
If this condition applies:

Boot File Needs to be Upgraded

Latest Boot File Loaded/No Application File
or Application File Needs to be Upgraded
Latest Boot File and System-Specific
Application File Already Loaded
Boot File Needs to be Upgraded
The telephone automatically downloads an upgraded boot file if applicable.
1. The telephone activates the Ethernet line interface, the PC Ethernet jack, and dial pad input
to allow the invocation of procedures. The activation occurs as soon as possible after
power-up or a reset.
2. During hardware initialization, the system initialization values for contrast and brightness
are checked for non-null values, and set accordingly. The Avaya one-X™ name and logo
display on sets with bit-mapped displays.
3. The system initialization value for the language file in use is checked for a non-null value, in
which case the text strings in the language file named by that value are used for text
display. Otherwise, English text strings are displayed.
4. The boot code checks for a primary software code image, loads it into volatile memory, and
transfers control to it. If a primary software code image is not found, the boot code loads
and transfers control to the backup software code image. Feedback displays in the form of a
moving outline on the black squares below the logo. The outline moves from one square to
the next to indicate processing is occurring.
When storage of a new backup image begins, Updating: displays on the Title Line and DO
NOT UNPLUG THE PHONE! displays on the Prompt Line until replaced by a subsequent
54 9600 Series SIP IP Telephones Release 1.0 Installation and Maintenance Guide
Dynamic Addressing
See:
Boot File Needs to be Upgraded
page 54.
Latest Boot File Loaded/No Application File
or Application File Needs to be
Upgraded on page 57.
Latest Boot File and System-Specific
Application File Already Loaded
page 59.
on
on