Avaya one-X Installation And Maintenance Manual page 22

9600 Series SIP IP Telephone Installation
Note:
Pressing the Program softkey at this time invokes the Craft Access entry
Note:
procedure to allow manual settings, but only if the PROCSTAT (local dialpad
procedure status) system value is "0" giving full access to local procedures). For
information, see
invoked, the startup process terminates. The Program softkey also displays in
conjunction with a Prompt Line message describing a processing conflict, for
example, when an ARP response indicates a conflict in obtaining the IP Address.
11. When connected, the telephone looks for an upgrade script file.
12. The HTTP server sends and identifies an upgrade script.
The GET message might have to be sent several times. Each time the GET message is
sent, the URI for the current HTTP request displays.
13. When the telephone determines that the application file received is valid, the following
message displays:
File Obtained;please wait...
s secs
where s is the number of elapsed seconds while non-volatile memory is erased.
14. While the application file is saved in flash memory, a progress bar shows the status:
15. The telephone contacts the Communication Manager call server and re-checks VLAN
status and tagging. The Prompt Line displays the following message:
Contacting Call Server...
16. The telephone attempts to download a valid device certificate using simple certificate
enrollment protocol (SCEP).
Simple Certificate Enrollment Protocol (SCEP)
1. When SCEP is initiated the telephone attempts to contact an SCEP server via HTTP, using
the value of the configuration parameter MYCERTURL as the URI. The HTTP connection is
established to the transport address specified by the value of the configuration parameter
HTTPPROXY if HTTPPROXY is not null and if the configuration parameter
HTTPEXCEPTIONDOMAINS is null, or• if HTTPEXCEPTIONDOMAINS is not null and the
rightmost part of the domain portion of MYCERTURL does not match one of the values of
HTTPEXCEPTIONDOMAINS. The values of the configuration parameters
MYCERTKEYLEN, MYCERTCN, MYCERTDN are used in the certificate request.
22 9600 Series SIP IP Telephones Release 1.0 Installation and Maintenance Guide
Chapter 3: Local Administrative Options. If Craft procedures are