Avaya one-X Installation And Maintenance Manual page 28

Local Administrative Options
Note:
Unless otherwise prohibited using administration, a user can view but not change
Note:
most of the parameters associated with Craft procedures. For more information,
see the applicable users guide(s).
Shown As
ADDR...
AGC...
CLEAR...
DEBUG...
GROUP...
INT...
LOG...
LOGOUT
RESET
VALUES
RESTART
PHONE
SIG...
SIP...
SNTP...
SSON...
VIEW
28 9600 Series SIP IP Telephones Release 1.0 Installation and Maintenance Guide
Craft Procedure Purpose
Network Address information
programming
Enable/disable Automatic Gain
Control
Clear all values to factory
defaults
Enable/disable Debug Mode
Set the Group Identifier
Network Interface Control
Enable/disable Event Logging
Log off the telephone
Reset system initialization
values to defaults
Restart the telephone
Set the signaling protocol
download flag
Configure SIP call settings
Configure the time server
settings
Set the Site-Specific Option
Number
View current parameter values
and file names
See
Static Addressing Installation
page 29.
Disable/Enable Automatic Gain
Control on page 31.
Clear Procedure on page 31.
Disable/Enable Debug Mode
page 32.
Group Identifier on page 33.
Interface Control on page 33.
Disable/Enable Event Logging
page 34.
Logout on page 35.
Reset System Values
Restart the Telephone
Signaling Protocol Identifier
Configuring SIP Settings
Configuring Time Server Settings
page 39.
Site-Specific Option Number Setting
page 37.
The View Administrative Option
page 39.
on
on
on
on page 36.
on page 36.
on page 37.
on page 38.
on
on
on