Avaya one-X Installation And Maintenance Manual page 14

9600 Series SIP IP Telephone Installation
Table 1: H.323 to SIP and SIP to H.323 Conversion Chart
Environment
SIP-centric
SIP-centric
SIP-centric
H.323-centric
H.323-centric
14 9600 Series SIP IP Telephones Release 1.0 Installation and Maintenance Guide
To convert this To this type
type of telephone of telephone
H.323 factory set SIP
H.323 in use SIP
SIP H.323
H.323 in use SIP
H.323 factory set SIP
Then:
No action is required because the
Signaling Protocol Identifier (SIG)
defaults to SIP. Upon power-up &
network connection, the telephone
automatically downloads the proper SIP
files.
Perform the SIG Craft procedure to
change the SIG parameter value from
"1" (H323) to "default" (SIP). For
information, see Signaling Protocol
Identifier on page 37.
Save the SIG parameter change.
Restart the telephone as covered in
Restart the Telephone
Perform the SIG Craft procedure to
change the SIG parameter value from
"default" to "1" (H323). For information,
see Signaling Protocol Identifier
page 37.
Save the SIG parameter change.
Restart the telephone as covered in
Restart the Telephone
Perform the SIG Craft procedure to
change the SIG parameter value from
"default" to "2" (SIP)." For information,
see Signaling Protocol Identifier
page 37.
Save the SIG parameter change.
Restart the telephone as covered in
Restart the Telephone
Connect the telephone to a power
source and to the network.
Press the Program softkey as soon as
it displays in the first softkey position to
access the Craft Access Code Entry
screen. Perform the SIG Craft
procedure and change the value from
"default" to "2" (SIP).
Save the SIG parameter change.
Restart the telephone as covered in
Restart the Telephone
on page 36.
on
on page 36.
on
on page 36.
on page 36.
1 of 2