Remote Access - AT&T E6012B User Manual

1.
Dial your telephone
number from any touch-
tone telephone.
2.
When the system answers,
enter the two-digit remote
access code (19 unless you
have changed it).
3. Enter remote commands
(see list on the right).
Hang up to end the call
4.
and save all un-deleted
messages.
NOTES:
1. If there are many old
messages in the mail-
box, after you press 3
twice, it will take up
to 20 seconds. During
this process, the system
will beep every second
to alert you that the
answering system is
deleting all old mes-
sages. During this time,
if the remote access
call is disconnected, the
answering system will
stop the deletion and
exit. In this case, only
some of the old mes-
sages may be deleted.
2. If you pause for more
than four seconds dur-
ing remote access, the
help menu listing all
features and commands
will be announced. If
there is no command
for another 20 seconds,
the call will end auto-
matically.
Answering system operation

Remote access

A two-digit security code is required to access
your answering system from any touch-tone tel-
ephone. This code is programmed as 19 at the
factory; to change it, see page 37.
Play all messages
1
Play new messages
2
Delete the message
3
33
Repeat or go back
4
Stop
5
Skip to next message
6
Record announcement
*7
to begin recording
5
to stop recording
Help menu
*5
Turn system off
0
Turn system on
0
Exit
8
42 42
Press to listen to all messages.
Press to listen to new messages.
Press during playback to delete
the current message. Press 3
twice to delete all old messages.
Press during message playback
to repeat the same message.
Press during the beginning of
the day and time announcement
to go back to the previous mes-
sage.
Press to stop any operation (stop
playback, stop recording).
Press to skip the current mes-
sage and advance to the next
message.
Press *7, wait for the beep, then
begin speaking. Press 5 to stop
recording and listen to the play-
back of the new announcement.
Press to listen to the list of fea-
tures and commands.
Press to turn off answering
system. Incoming calls will no
longer be answered.
If off, the system will answer
after 10 rings. Enter your access
code, then press 0 to turn on
the answering system.
Press 8 to end remote access
call or hang up.