System Requirements; Assembly And Installation; Assembly Instructions; G3 Disc Publisher Assembly - MicroBoards Technology G3 User Manual

System Requirements

The Microboards G3 Disc Publisher has the following minimum requirements and compatibilities:
Operating System
Mac OS 10.5
Processors
Intel Processor is required
System Memory
Minimum 1 GB of system memory
Hard Drive
A separate internal 7200 RPM hard drive is recommended for storing your data. Using the same
hard drive as the operating system can cause the system to perform slowly.
USB Connection
USB 2.0 is required. USB 1.1 is not supported, as using USB 1.1 will result in significantly longer
recording times and the potential for recording failures.

Assembly and Installation

Assembly Instructions

G3 Disc Publisher Assembly

Remove the G3 Disc Publisher
system from the shipping box and
confirm you received all of the
items.
Place the G3 Disc Publisher on a
stable, flat surface. You will need
room both in front and behind the
system, as discs will be accessed
from both locations.
The Input Bin posts are pre-
installed, with the wide post to the
right.
The 50-disc Output Bin is shipped in
place under the front cover. Lift the
cover to remove the packaging tape
from the Output Bin.
6