Shroud And Covers - Yamaha RX10RTL Owner's Manual

Hide thumbs Also See for RX10RTL:
Table of Contents

Advertisement

CAUTION :
@
G
Do not use accessories requiring more than the
maximum rated capacity for the auxiliary DC jack.
This may overload the circuit and cause the fuse
to blow. (See pages 8-33–8-34 for the specified
amperage.)
G
Do not use an automotive cigarette lighter or
other accessory with a plug that gets hot
because the jack can be damaged.
@
Maximum rated capacity:
DC 12 V, 2.5 A (30 W)
ESU04730

Shroud and covers

Securely fasten the shroud and covers before operating
the snowmobile. (See pages 8-5–8-7 for removal and
installation procedures.)
1 Shroud
2 Right side cover
3 Left side cover
4 Top cover
WARNING
@
G
Do not drive the snowmobile with the shroud or
covers unfastened or removed.
G
Keep your body and clothing away from rotating
parts when servicing the snowmobile with the
shroud or covers removed.
G
Do not touch the hot muffler and engine during or
immediately after operation.
@
CAUTION :
@
Make sure that all cables, leads, etc., are in place
when installing the shroud and covers.
@
5-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx10rlRx10rtrlRxw10l

Table of Contents