2
1
2
TIP
The auxiliary DC jack can only be used if the engine is
running.
ESU00461*
Tripmeter reset knob
Use the tripmeter reset knob to reset the tripmeter.
1 Tripmeter reset knob
2 Turn counterclockwise
833-005
ESU00481
Shroud latches
To open the shroud, unhook the shroud latches, and then
slowly raise the shroud forward until it stops. When clos-
ing the shroud, slowly lower it to its original position, and
1
then hook the shroud latches.
845-014
1 Shroud latch
2 Shroud
WARNING
@
●
Do not drive the snowmobile with the shroud
open, unlatched, or removed.
●
Keep your body and clothing away from rotating
parts when servicing with the shroud open.
●
Do not touch the hot muffler and engine during or
immediately after operation.
@
NOTICE
@
Make sure that all cables and wires are in place when
closing the shroud.
@
5-6