ESU01811
Changing the brake fluid
Brake fluid replacement is necessary when the following
components are replaced during the periodic mainte-
nance or if they are damaged or leaking.
a. All oil seals of the master cylinder and caliper cylinder
b. The brake hose
WARNING
@
Make sure that the brake fluid and the above parts
are replaced by a Yamaha dealer.
@
ESU00183
Suspension
The suspension can be adjusted to suit rider preference.
A softer setting, for example, may provide greater rider
comfort, while a harder setting may allow more precise
handling and control over certain types of terrain or riding
conditions.
WARNING
@
Be sure to have a Yamaha dealer make this adjust-
ment.
@
ESU04821
Adjusting the ski spring preload
The spring preload can be adjusted by turning the spring
preload adjuster 1.
For RX10RT/RX10R/RXW10
CD-11E
Spring seat length*
Preload
a Length
∗ The spring seat length changes approximately 1.5 mm (0.06 in) with
each full turn of the adjuster.
NOTE:
@
For RX10RTR:
To adjust the shock absorbers, refer to the separate
shock absorber owner's manual.
@
8-22
Standard
Increased ←
←
Harder
Maximum
144.5 mm
134.5 mm
(5.69 in)
(5.30 in)
→ Decreased
→
Softer
Minimum
134.5 mm
(5.30 in)