Table of Contents
Advertisement
A
ESU04670
Adjusting the rear suspension spring preload
The rear suspension spring preload can be adjusted by
turning the spring preload adjuster 1 on the shock
absorber.
CD-26E
Spring adjuster position
Preload
È Standard
NOTE:
@
The rear suspension spring preload can be further
adjusted by changing the position of the spring seat.
Have a Yamaha dealer make this adjustment as it
requires special tools.
@
WARNING
@
Be sure to have a Yamaha dealer make this adjust-
ment.
This shock absorber contains highly pressurized
nitrogen gas. It could explode by improper handling,
causing injury or property damage.
G
Do not tamper with or attempt to open the shock
absorber.
G
Do not subject the shock absorber to an open
flame or other high heat sources, which could
cause it to explode.
G
Do not deform or damage the shock absorber in
any way.
G
Do not dispose of a worn or damaged shock
absorber by yourself. Take the unit to a Yamaha
dealer.
@
8-24
1
2
3
4
5
Soft
4
6
7
Hard
Advertisement
Table of Contents
