Checking The Brake Pads; Checking The Parking Brake Pads - Yamaha RX10RTL Owner's Manual

Adjusting the chain tension
1. Remove the shroud and the right side cover. (See
pages 8-5–8-7 for removal procedures.)
2. Loosen the locknut.
3. Turn the adjusting bolt clockwise until it is finger tight,
and then loosen it 1/4 turn.
4. Hold the adjusting bolt in place while tightening the
locknut.
1 Locknut
2 Adjusting bolt
5. Install the right side cover and the shroud.
ESU00174

Checking the brake pads

Check the brake pads for wear.
If the brake pads reach the wear limit, ask a Yamaha
dealer to replace them.
1 Brake pad wear indicator
Wear limit a: 1.2 mm (0.05 in)
ESU00352

Checking the parking brake pads

Check the parking brake pads for wear by measuring the
thickness of the pads. If the parking brake pads reach
the wear limit, ask a Yamaha dealer to replace them.
Wear limit a: 1.0 mm (0.04 in)
Adjustment
As the parking brake pads wear, adjustment may be nec-
essary to ensure proper brake performance.
WARNING
@
Be sure to have a Yamaha dealer make this adjust-
ment.
@
8-20