Tool Kit; Recommended Equipment; Removing And Installing The Shroud And Covers - Yamaha VENTURE PZ5NXJ Owner's Manual

Periodic maintenance and adjustment
ESU13004

Tool kit

The owner's tool kit is located in the storage
pouch. (See page 22 for more information
about the storage pouch.)
The service information included in this man-
ual and the tools provided in the owner's tool
kit are intended to assist you in the perfor-
mance of preventive maintenance and minor
repairs. However, additional tools such as a
torque wrench may be necessary to perform
certain maintenance work correctly.
1
1. Storage pouch
2. Tool kit
ECS00782
NOTICE
Before starting the engine, make sure that
the tool kit is securely fastened (PZ5NX)
and that the storage pouch zipper is com-
pletely closed.
TIP
If you do not have a torque wrench available
during a service operation requiring one, take
your snowmobile to a Yamaha dealer to
check the torque settings and adjust them if
necessary.
44
ESU14231

Recommended equipment

It is good practice to carry the spare parts
and other necessary equipment with you
while riding the snowmobile so that minor re-
pairs can be done if necessary. The following
should be carried at all times:
 Flashlight
 Roll of plastic tape
 Steel wire
 Tow rope
 V-belt
 Light bulbs
When you start out for a long distance trip,
extra fuel should be carried as well.
ESU11767
Removing and installing the
shroud and covers
EWS00092
WARNING
Be sure shroud and covers are secured
before operation. A loose shroud or cover
could move and cause loss of control.
Front cover and air filter case cover
(PZ5NX)
To remove the front cover and air filter case
cover
1. Unhook the latch, and then slide the front
cover upward.
2
1. Latch
2. Front cover
1