Installing a module
Install the Slim SelectBay HDD adaptor as described below.
■
Insert the Slim SelectBay HDD adaptor in the computer as shown
below and press until the ejector clicks.
Using optical media drives
The text and illustrations in this section refer primarily to the DVD-ROM
drive. However, operation is the same for other optical drive in the Slim
SelectBay. The full-size drive provides high-performance execution of
CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used
for CD/DVD-ROM operation. When the computer is accessing a
CD/DVD-ROM, an indicator on the drive glows and the Slim SelectBay
indicator glows.
Use the WinDVD 4 application to view DVD-Video discs.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs
section for precautions on writing to CDs.
Portégé M100
Installing the Slim SelectBay HDD adaptor
Operating Basics
4-5