Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4, Operating Basics.
Problem
Cannot access
Wireless LAN
i.LINK (IEEE1394)
Problem
i.LINK device does not
function
Real Time Clock
Problem
The following
message is displayed
on the LCD: RTC
battery is low or
CMOS checksum is
inconsistent.
Press [F1] key to
set Date/Time.
Portégé M100
Procedure
Make sure the computer's wireless
communication switch is set to on.
If problems persist, consult your LAN
administrator.
Procedure
Make sure the cable is securely connected to the
computer and to the device.
Make sure the device's power is turned on.
Reinstall the drivers. Open the Windows Control
Panel and double-click the Add New Hardware
icon. Follow the on-screen directions.
Restart Windows.
If problems persist, contact your dealer.
Procedure
The battery for RTC is wearing. Set the date and
time in BIOS setup with the following steps:
1. Press F1 key. BIOS setup will boot up.
2. Set the date in System Date.
3. Set the time in System Time.
4. Press End key. Confirmation message will
appear.
5. Press Y key. BIOS setup will terminate and
the computer will be rebooted.
If problems persist, contact your dealer.
Troubleshooting
9-18