Advanced Port Replicator II
In addition to the ports available on the computer, the Advanced Port
Replicator II provides, audio line-out jack, line-in jack and separate ports
for PS/2 mouse and PS/2 keyboard. The Port Replicator connects directly
to the docking interface on the bottom of the computer. The AC adaptor
connects the Port Replicator to a power source.
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer's default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures.
You must disconnect the AC adaptor before you connect to a Port
Replicator.
The following ports and accessories are available on the Port Replicator.
■
One RJ45 LAN jack
■
One RJ11 Modem jack
■
External monitor port
■
Parallel port
■
Serial port
■
PS/2 mouse port
■
PS/2 keyboard port
■
DC IN 15V socket
■
Security lock slot
■
Audio line-in, line-out jacks
■
Universal Serial Bus (two) ports
■
i.LINK (IEEE 1394) port
■
DVI port (This port is not supported by the Portégé M100.)
When an Advanced Port Replicator II is connected to the computer, you
can use the computer's headphone and microphone jacks only.
Disconnect all other cables connected to the computer.
Portégé M100
Optional Devices
8-15