Installing The Cooling Module - Toshiba TECRA S1 Maintenance Manual

4.2 Cooling Module

Installing the Cooling Module

Install the cooling module according to the following procedures and Figures 4-7, 4-8 and .
CAUTION: When installing the cooling module, keep the following in mind:
1. Be sure to confirm the correct position for the module.
2. Route the cooling module cable between the module and MDC card.
3. Please according to the number sequence sealed on heatsink module and secure the
relevant screws on the mainboard.
NOTE: Apply silicon greases with a special syringe to cover the surface of the CPU chip
completely.
TECRA S1 Maintenance Manual
Downloaded from www.Manualslib.com
CPU chip
Figure 4-8 Applying silicon greases
manuals search engine
4 Replacement Procedures
4-19