Lcd Panel; Hard Disk Drive - Toshiba Portege M100 User Manual

LCD panel

Apparent LCD problems may be related to the computer's setup. Refer to
Chapter 7, HW Setup, for more information.
Problem
No display
Problems above
remain unresolved
or other problems
occur

Hard disk drive

Problem
Computer does not
boot from hard drive
Slow performance
Portégé M100
Procedure
Press hotkeys Fn + F5 to change the display
priority, to make sure it is not set for an external
monitor.
Refer to your software's documentation to
determine if the software is causing the difficulty.
Run the diagnostic test.
Contact your dealer if the problems continue.
Procedure
Check if a diskette is in the diskette drive or a
CD-ROM is in the optical media drive. Remove
any diskette and/or CD-ROM and check Boot
priority. Refer to Chapter 7, HW Setup.
There may be a problem with your operating
system files. Refer to your OS documentation.
Your files may be fragmented. Run SCANDISK
and defragmenter to check the condition of your
files and disk. Refer to your OS documentation
or online HELP for information on running
SCANDISK and the defragmenter.
As a last resort, reformat the hard disk. Then,
reload the operating system and other files.
If problems persist, contact your dealer.
Troubleshooting
9-8