Removing the HDD pack
To remove the HDD pack, follow the steps below and refer to the figures
below.
1. Set the computer to boot mode and turn off the power.
2. Disconnect the AC adaptor and all external cables connected to the
computer.
3. Turn the computer upside down and remove the battery pack (refer to
Chapter 6, Power and Power-Up Modes.)
4. Remove two screws securing the HDD pack cover.
5. A small row of ridges mark latches securing the cover. Press on these
ridges until you hear a click.
6. Press on the arrows and lift the cover up and out to remove it.
7. Pull out the HDD's plastic tab and pull it straight out to remove the
HDD pack.
Portégé M100
Removing the HDD pack cover
Removing the HDD pack
Optional Devices
8-12