Region Selection; Properties Menu - Toshiba Portege M100 User Manual

Region selection

Telecommunication regulations vary from one region to another, so you
will need to make sure the internal modem's settings are correct for the
region in which it will be used.
1. Click start, point to All Programs, point to TOSHIBA Internal
Modem and click Region Select Utility.
Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the
Country/Region in the Control Panel, the change may not take effect.
2. The Region Selection icon will appear in the Windows Task Bar.
3. Click the icon with the primary mouse button to display a list of
regions that the modem supports. A sub menu for telephony location
information will also be displayed. A check will appear next to the
currently selected region and telephony location.
4. Select a region from the region menu or a telephony location from the
sub-menu.
■
■

Properties menu

Click the icon with the secondary mouse button to display properties
menu on the screen.
Setting
You can enable or disable the following settings:
AutoRun Mode
Region Select Utility starts automatically when you start up the operating
system.
Portégé M100
When you click a region it becomes the modem's region selection,
and the New Location for telephony will be set automatically.
When you select a telephony location, the corresponding region is
automatically selected and it becomes the modem's current region
setting.
Operating Basics
4-23