Toshiba TOSVERT VF-AS1 Instruction Manual page 212

Input terminal information
Note: When
indicate information of lower 8 bit terminal (B0~B7).
Output terminal information
8
Cumulative operation time
For indication of cumulative operation hours, running hours are counted up when the output frequency monitor
reads a frequency other than 0.0Hz. 10 hours is indicated as 0.1 (unit of Indication).
Input terminal 1 (F)
Input terminal 2 (R)
Input terminal 3 (ST)
Input terminal 4 (RES)
Input terminal 5 (S1)
Input terminal 6 (S2)
Input terminal 7 (S3)
Input terminal 8 (RR/S4) : F118 : 7
Input terminal 9 (LI1)
Input terminal 10 (LI2)
Input terminal 11 (LI3)
Input terminal 12 (LI4)
Input terminal 13 (LI5)
Input terminal 14 (LI6)
Input terminal 15 (LI7)
Input terminal 16 (LI8)
Input terminal 9 to 16
is set at a number of to expansion terminal board option input terminal information ( ,
Output terminal 1 (OUT1)
Output terminal 2 (OUT2)
Output terminal 3 (FL)
Output terminal 4 (OUT3) : F133 : 4
Output terminal 5 (OUT4) : F134 : 5
Output terminal 6 (R1)
Output terminal 7 (OUT5) : F136 : 7
Output terminal 8 (OUT6) : F137 : 8
Output terminal 9 (R2)
Output terminal 10 (R3)
Output terminal 11 (R4)
Output terminal 4, 5, 6 (OUT3, OUT4, R1) :Expansion terminal board
Output terminal 7, 8, 9 (OUT5, OUT6, R2) :Expansion terminal board
Output terminal 10, 11 (R3, R4)
H-4
Data bit of communication
No. F E 06
: F111 : 0
: F112 : 1 When there is signal input
: F113 : 2
: F 114 : 3 When there is no signal input
: F115 : 4 (blank in the upper half)
: F116 : 5
: F117 : 6
: F119 : 8 When there is signal input
: F120 : 9
: F121 : 10 When there is no signal input
: F122 : 11 (blank in the upper half)
: F123: 12 When there is signal input
: F124: 13
: F125: 14 When there is no signal input
:F126: 15 (blank in the upper half)
: Expansion terminal board option unit
Data bit of communication
No. F E 07
: F130 : 1 When there is signal output
: F131 : 2
: F132 : 3 When there is no signal output
(blank in the upper half)
: F135 : 6 When there is signal output
When there is no signal output
: F138 : 9 (blank in the upper half)
: F168 : 10
: F169 : 11
option unit 1
option unit 2
:16-bit BIN/BCD option
E6581301
)