Plu Codes - Olivetti ECR 5200 Instructions Manual

Discounting (-%) One Item Using the Programmed
Discount Rate
Up to four digits can be used for the discount percentage (0-99.99%).
You MUST enter two digits after the decimal position.
Example: Register a programmed 10% discount to a £.99 cash transac-
tion to Department 5.
Proceed as follows:
1. Type [99] and press the [Department 5/11] key.
2. Press the [-%] key to apply the programmed discount. The amount
discounted is displayed.
3. Press the [Sub Total] key to print and display the current balance due.
4. Press the [Amt Tend/TOTAL] key to end the transaction with a
correct cash tender.
46

PLU Codes

Registering a Sales Transaction Using Preset PLU
Codes
previously set. Turn to the section entitled Programming PLU Prices for
information on how to define a PLU to an individual item.
NOTE: If you wish to register a PLU that has been programmed as an
Example: Use preset PLU codes to register an entire transaction: register
PLU 1 and multiply 3 PLU 2. Compute change for a cash tender.
1. Type [1] followed by the [PLU] key.
2. Type [3] followed by [Qty/Time], then press [2] followed by the
3. Press the [Sub Total] key to print and display the current balance due.
Programmed discount rate
4. Type the amount tendered [1000] and press the
Discount
In order to be able to use this feature, PLU codes must have been
Open PLU Price (programming status option 1), remember to
press the [PLU] key twice after entering the related PLU
number.
Proceed as follows:
[PLU] key. The amount of the multiplication is displayed.
[Amt tend/TOTAL] key. The change due to the customer is
displayed and the transaction is ended successfully.