Plu Programming Dump Report - Olivetti ECR 5200 Instructions Manual

Machine
Condition
9 0 = Non-selection of the TAX ON TAX Canadian taxation
system
1 = Selection of the TAX ON TAX Canadian taxation system
10 N/A
11 0 = Euro convert function not allowed
1 = Euro convert function allowed
12 0 = Zero price entry not allowed
1 = Zero price entry allowed
13 0 = Print conversion tender only
1 = Print all tender
14 0 = Local base currency
1 = Euro base currency
22
Settings Changing the Cash Register's Standard Settings
Proceed as follows if you wish to change any of the standard machine
settings indicated in the previous table:
1. Slide the control switch to the PRG position.
2. Type the [number] of the machine condition (1-14 as indicated in the
table) that you wish to alter.
3. Type the [number] of the required setting.
4. Press the [RA/ ] key.
5. Program another feature or exit the program mode by sliding the
control switch to the OFF position.
Example: Program the cash register to work with a Euro base currency.
Type/Press:
[14] + [1] + [RA/ ]

PLU Programming Dump Report

If a large number of PLUs are created (bear in mind that up to 99 or 200
PLUs, depending on the model purchased, can be programmed), a
separate receipt can be printed indicating all the PLUs programmed. Their
number, associated price, VAT rate indicator (if applicable) and associated
department are reported on this receipt, which should be kept in a safe
place for future reference.