The Ink Roller; Installing The Ink Roller; Paper Tape - Olivetti ECR 5200 Instructions Manual

The Ink Roller

This register comes equipped with the ink roller installed. The ink roller
releases special ink to the printhead which produces a printout on the
paper. After a period of time, depending on the usage, the ink in the ink
roller will be used up. When printing becomes faint, the ink roller needs to
be replaced.
NOTE: The ink roller is NOT designed to be re-inked. Under no
circumstances should this be done or permanent damage to your
cash register printhead will result.

Installing the Ink Roller

Proceed as follows to install the ink roller:
1. Unlock, open and remove the printer compartment cover.
2. The ink roller is found in front of the printhead mounted in a plastic
cartridge. To remove the roller, grasp the small clip on the on the left of
the ink roller and pull up. The ink roller will easily pull away from the
printhead.
3. To install a new ink roller, insert the ink roller according to the markings
"L" (Left) and "R" (Right) by pressing downward to lock it into
position.
4. Reposition, close and lock the printer compartment cover.
For best performance, store an unopened ink roller package in a cool,
dry place.

Paper Tape

This cash register uses standard 2 1/4" (57 mm) calculator paper. The
paper needs to be changed when a red line appears on the tape.
11