Error Messages - Sharp MD-DR470H Operation Manual

Error Messages

MD-DR470H
ENGLISH
ERROR MES-
SAGES
" Nothing is recorded.
BLANK MD
(Replace the disc with a recorded disc.)
" A track is being moved.
BUSY
" You tried to record from a copy prohib-
Can't COPY
ited MiniDisc.
" You tried to record signals other than
music (such as data).
(Record using the analogue cable.)
" A track cannot be edited.
Can't EDIT
(Change the stop position of the track and
then edit it.)
" You tried to record or edit the MD
Can't LOCK
whilst operating the OPEN lever.
" Cannot play the MD.
Can't PLAY
" Recording cannot be performed cor-
Can't REC
rectly due to vibration or shock.
Can't READ (*) " The disc data cannot be read because
the disc is damaged.
(Reload the Minidisc or replace it with an-
other one.)
" Stamp function does not work.
Can't STAMP
(Check the number of tracks.)
A number or symbol appears in (*) position.
E-63
MEANING ERROR MES-
SAGES
Can't WRITE
DISC-FULL
(D-FULL)
DEFECT!
Er-MD (**)
GROUP FULL
HOLD
BATT EMPTY
(LoBATT)
LOCKED
(LOCKED)
02/12/18
MEANING
" Cannot save the TOC information cor-
rectly to a MiniDisc.
" The disc is out of recording space.
" The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
" The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)
" The total number of groups exceeds
99.
(Erase unnecessary groups.)
" The unit is in the hold mode.
" The rechargeable or alkaline battery
has run down.
" You removed a MiniDisc whilst record-
ing or editing.
(Turn off the power before removing the
MiniDisc.)
MDDR470_SEEG_E.fm