Sharp MD-DR470H Operation Manual page 46

! Characters (symbols)
A B C D E F G H I J K L M N
. ,
S T U V W X Y Z /
a b c d e f g h i j k l m n
s t u v w x y z . ,
/
1 3 4 5 6 7 8 9 0 ! " # $
2
) + , . / : ; < = > ? @
Notes:
" One disc name and up to 99 group names and 255
track names can be created per disc. (A maximum of
40 characters for each disc, group and track name,
and a total of about 1,700 characters can be entered
per disc.)
" You cannot use "/" in a name successively.
" The MD that has been group recorded with this unit
should not be named using other equipment. The disc
may not be played properly.
" If the number of characters entered as a disc, group or
track name exceeds 40, "NAME FULL" will be dis-
played.
" When a disc, group, or track name that contains 40
characters is changed, "NAME CUT" will be displayed.
In this case, delete all the characters and reenter the
names.
" If you enter "LP:" at the beginning of a name, "LP:"
may not be displayed.
! Stamping titles from another MiniDisc
Before stamping
O P Q R
When there are 2 MiniDiscs on which the same tracks
are recorded, you can transfer the character information
(disc, group, and track names) of the master MiniDisc to
o p q r
another MiniDisc (for stamping) simultaneously.
1 What is a master MiniDisc?
% ' (
&
A recordable MiniDisc that contains tracks and charac-
_ `
ter information. (You cannot transfer the information
from a playback-only MiniDisc.)
2 What is a MiniDisc for stamping?
A MiniDisc that contains the same tracks in the same
order as the master MiniDisc. (Make sure that the total
number of tracks of the master MiniDisc and the one for
stamping are the same.)
Notes:
" When information of the non-grouped MD is stamped on
the group-recorded MD, the disc and track names will be
stamped properly. However, the group information will be
erased.
" When information of the group-recorded MD is stamped
on the non-grouped MD, tracks will be grouped automati-
cally.
02/12/18
MD-DR470H
ENGLISH
E-46
MDDR470_SEEG_E.fm