Sharp MD-DR470H Operation Manual page 47

Titling a MiniDisc (continued)
MD-DR470H
ENGLISH
Master MiniDisc operation
1
Insert a master MiniDisc.
Do not mistake the master MiniDisc for the target one.
2
Whilst in the stop mode, press the MENU button.
The unit enters the menu select mode.
3
Select "EDIT" by pressing the
or button and press the
MENU button.
4
Select "NAME STAMP"
pressing the or button
and press the MENU button.
5
Press the MENU button.
6
When the unit displays
"CHANGE MD", remove the
master MiniDisc.
Remove it without turning off the power. Or, the opera-
tion will be cancelled.
E-47
Operation of the MiniDisc for stamping
7
Load a MiniDisc for stamping.
8
Press the MENU button.
The unit will finish recording the
character information and enter
by
the stop mode.
Note:
If the total number of tracks on the
master MiniDisc does not match
that on the MiniDisc for stamping,
the unit will display "Can't STAMP"
and turn off the power.
If this happens, adjust the total number of tracks on the newly
recorded MiniDisc using the edit operation.
02/12/18 MDDR470_SEEG_E.fm