Sharp MD-DR470H Operation Manual page 64

ERROR MES- MEANING
SAGES
" The number of a disc, group, or track
NAME FULL
name exceeds 40.
(Shorten the name.)
" A disc has not been loaded.
NO DISC
(NoDISC)
" Poor connection of the digital cable.
NO SIGNAL
(noSIG.)
" No output signal comes out from the
connected unit to playback.
(Use the AC power for the connected
unit.)
" The input signal has improper sam-
pling frequency.
" There is no track to be played.
NO TRACK
(NoTRACK)
" You tried to record on a playback-only
PLAY MD
(PLAYmd) disc.
" AC adaptor other than specified.
POWER?
" Abnormal voltage detected.
" The write protection tab of a MiniDisc
PROTECTED
is set to the protected position.
" Cannot operate this unit whilst search-
SORRY
(Sorry) ing/updating groups and track num-
bers.
(Wait for a while and try the operation
again.)
ERROR MES- MEANING
SAGES
" There is an error in the recording sig-
TOC FORM
(**) nal.
(Erase all of the tracks, and then record
again.)
" There is no space left for recording
TOC FULL
(T-FULL) character information (track names,
disc names, etc.).
" The temperature is too high.
TEMP OVER
(Turn off the power, and wait for a while.)
" The track has been protected from be-
Tr. Protect
ing erased.
(Edit the track with the device on which it
was recorded.)
" A disc which contains data other than
?DISC
music was played.
(A disc which contains nonmusic data
cannot be played.)
" The group recording or the GROUP
? Gr Form
RESERVE function cannot be per-
formed.
(Erase the disc name and retry the same
operation.)
" A number or symbol appears in (*) position.
" Messages shown in the brackets are shown on the
remote control.
02/12/18 MDDR470_SEEG_E.fm
MD-DR470H
ENGLISH
E-64