Sharp MD-DR470H Operation Manual page 42

Checking track by track
[On the remote control]
1 Select a track by pressing the or
2 Press the DISPLAY button.
A B C
[On the main unit]
Select a track by pressing the or
D B E C
Disappears
Track number
Playing time
Track name
Lights up
To check all tracks, press the button.
! Checking the remaining amount of battery
level
The remaining amount of battery level is shown by the
button.
battery indicator ( ) during operation.
D
button.
" When the battery is completely discharged, the bat-
tery indicator will flash. Recharge the battery or
replace the alkaline battery with a new one.
" When the battery has run out completely, "BATT
EMPTY" will appear. Then, the power will be discon-
nected automatically.
Notes:
" If you use the battery which you stopped charging
halfway, " " may appear. It does not mean that the
battery is completely charged.
" The battery indicator will not correctly display the
remaining capacity for approximately 20 seconds after
the power has been turned on.
" When the AC adaptor or a separately available car
adaptor is used, the battery indicator will not be
shown.
" The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
02/12/18
MD-DR470H
ENGLISH
E-42
MDDR470_SEEG_E.fm